EDF heat pump installation cost and review (UK guide)
What you can realistically expect to pay, what’s usually included, and how to check if a heat pump is right for your home — plus a simple way to compare whole-of-market energy deals once you’ve moved to electricity-heavy heating.
- Clear cost ranges and what changes the price (house type, radiators, hot water)
- UK-specific grants explained (including the Boiler Upgrade Scheme)
- Practical checks before you book: insulation, emitter size, running-cost expectations
Estimates only. Prices, availability and eligibility vary by home, installer survey and grant rules. Always get a written quotation and heat-loss calculation.
Fast answer: EDF heat pump installation cost and review
EDF heat pump installation cost and review: in the UK, an air source heat pump installation is commonly quoted in the £8,000–£18,000 range after a home survey, with the final price driven by heat loss, radiator upgrades and hot-water changes. Grants such as the Boiler Upgrade Scheme can reduce eligible costs, but installation quality matters as much as the brand.
Most common cost drivers
- Heat-loss result (kW size)
- Radiators/pipework changes
- Hot-water cylinder & controls
- Outdoor unit position & electrical work
How to “review” an offer
- Ask for a written heat-loss calc
- Check MCS certification & warranty terms
- Confirm what’s included/excluded
- Look for commissioning paperwork
Quick next steps
- Get an installation survey quote
- Check grant eligibility
- Compare electricity tariffs for your postcode
Important: we don’t publish “live” supplier prices here (they change and depend on meter type and payment method). Use the quote journey for up-to-date electricity deals for your postcode.
What an EDF heat pump install usually includes (and what to verify)
EDF is an energy supplier, and heat pump installs are typically delivered through an installer network or partner model. Your experience will depend heavily on the specific surveyor and installation team, so treat “EDF heat pump” as the overall package (survey, design, installation, commissioning and aftercare) rather than a single product.
Typically included in a full “turnkey” quote
- Home survey + heat-loss calculation
- The design step that sizes the system and sets radiator requirements. Ask for the written output.
- Outdoor unit + indoor hydraulic components
- The “heat pump” itself, plus pumps/valves and controls (varies by system design).
- Hot-water cylinder (often, but not always)
- Many homes need a new cylinder compatible with heat pump temperatures. Confirm size and location.
- Radiator upgrades (some homes)
- Heat pumps run most efficiently at lower flow temperatures, so some radiators may need upsizing.
- Electrical work and commissioning
- Includes isolators/cabling; commissioning should include settings, handover and paperwork.
Quality marker: a good quote explains target flow temperatures, emitter changes, and how hot water will be produced (including any immersion heater use). If those are vague, push for clarity before paying a deposit.
Get help comparing energy deals after you switch to a heat pump
Moving from gas to a heat pump typically makes your home more electricity-heavy. That means the best tariff for you can change (and it may depend on your meter type and payment method). Compare whole-of-market options for your postcode — no guesswork.
Request a comparison (takes ~2 minutes)
EDF heat pump installation: comparison points that matter
If you’re weighing EDF’s heat pump offering against other installers, focus on the parts that affect comfort, running costs and aftercare — not just the headline price. Use the table below as a “quote-checker” during surveys.
| What to compare | Why it matters | What to ask EDF/installer | Good sign |
|---|---|---|---|
| Heat-loss calculation | Right sizing reduces cycling, noise and bills. | Can I have the written heat-loss and room-by-room emitter plan? | Room-by-room numbers and proposed flow temperature. |
| Radiator/pipework scope | Under-sized emitters push higher temps and costs. | Which radiators are being replaced and why? | Clear list of changes + makes/sizes, not “allowances”. |
| Hot water design | Affects shower performance and legionella control cycles. | Cylinder size/position? Any immersion heater assumptions? | Explained reheat times and weekly high-temp cycle approach. |
| Commissioning & handover | Tuning is where performance is won or lost. | Will you set weather compensation and explain controls? | Documented settings + customer walk-through. |
| Aftercare & warranty | You need a clear route for faults and servicing. | Who provides warranty cover and service response times? | Single point of contact and written warranty terms. |
Who EDF heat pump installs may suit
- You want a structured process with a well-known household brand as the front door.
- You prefer a packaged journey (survey → install → paperwork) rather than coordinating trades yourself.
- You’re happy to judge the offer on the survey detail and written scope, not on marketing claims.
Who it may not suit
- You want to choose a specific local installer with long-standing local service history.
- Your home is complex (multiple extensions, mixed emitters, or tight external space) and you need bespoke design choices.
- You want to compare multiple technical approaches (buffer tanks, zoning strategy, hybrid systems) before committing.
Tip: whichever provider you choose, confirm the installer is certified under the MCS scheme if you intend to claim the Boiler Upgrade Scheme grant. You can verify installers via the MCS installer database on the official MCS website.
EDF heat pump installation cost: what you might pay (and why it varies)
A heat pump quote is a design-led price, not a “one-size” product. Two similar homes can be priced differently depending on insulation levels, room sizes, heat emitter requirements, and the complexity of the install. Use these ranges as a sense-check, then rely on a written survey quote for accuracy.
Typical installed price range (UK)
£8,000–£18,000 is a common ballpark for an air source heat pump installation after survey, depending on scope. Ground source heat pumps are often higher due to groundworks and collector/borehole costs.
Grant support (Boiler Upgrade Scheme)
In England and Wales, the Boiler Upgrade Scheme can provide a grant towards eligible air source or ground source heat pumps, subject to criteria. Your installer normally applies on your behalf. Always confirm eligibility and how the grant is shown on the quote.
Running costs depend on two levers
- Your home’s heat demand (insulation + draughts)
- The system’s efficiency in practice (flow temp, controls, commissioning)
Two realistic scenarios (with assumptions)
Scenario A: Smaller, well-insulated home
- Home: 2–3 bed, decent loft insulation and double glazing
- Heat emitters: a few radiator upgrades needed
- Hot water: cylinder replacement required
- Install complexity: straightforward outdoor unit position
Indicative installed quote: £8,000–£13,000 (before any grant adjustments). Your actual figure depends on survey results, electrical works and radiator list.
Scenario B: Larger / less efficient home needing upgrades
- Home: 4 bed or older property with higher heat loss
- Heat emitters: multiple radiator replacements and pipework changes
- Hot water: cylinder relocation or larger capacity
- Install complexity: long pipe runs, more electrical work
Indicative installed quote: £13,000–£18,000+ (before any grant adjustments). Costs can rise if access is difficult or if significant remedial work is needed.
About the numbers: These are editorial ranges based on common UK installation scopes and what typically moves price up/down (emitters, cylinder, electrical works). They are not live EDF pricing and not a promise of what you will pay.
What’s often excluded (check before you sign)
Insulation improvements
Loft/wall insulation and draught proofing can be essential for comfort, but may be outside the heat pump quote.
Upgrades to your consumer unit
Some homes need electrical upgrades to meet current standards. Confirm who pays if it’s required.
Making good / decorating
Pipe routes, boxing-in and redecoration can be partly excluded. Ask what finishing work is included.
Planning / noise constraints
Most air source heat pumps are permitted development, but siting still matters. Check noise guidance and boundaries.
Common pitfalls we see (and how to avoid them)
Pitfall: chasing the lowest quote
Low prices can mean missing radiator work, vague “allowances”, or minimal commissioning.
Fix: ask for a room-by-room emitter plan and a clear inclusion list.
Pitfall: “heat pump will work like a boiler” expectations
Heat pumps tend to run for longer at lower temperatures. Comfort is great when set up correctly, but it can feel different.
Fix: get control guidance and discuss flow temperature and set-back strategies.
Pitfall: ignoring tariff/meter implications
Your best electricity deal may change, and options can vary by meter type (e.g. smart meter, legacy multi-rate meters) and payment method.
Fix: compare whole-of-market tariffs for your postcode and confirm meter details before switching.
FAQs
How much does an EDF heat pump installation cost in the UK?
It varies by home and survey findings, but an air source heat pump installation is commonly quoted in the £8,000–£18,000 range. The biggest price drivers are heat-loss (system size), radiator upgrades, hot-water cylinder changes and electrical work. Always rely on a written survey quote.
Is an EDF heat pump eligible for the Boiler Upgrade Scheme grant?
Eligibility is based on the property and the installation meeting the Boiler Upgrade Scheme rules (and typically using an MCS-certified installer and product). If EDF provides installs via partners, the key is whether the installation is completed under the required certification and paperwork. Ask the installer to confirm in writing.
Do I need new radiators with a heat pump?
Not always, but many homes need at least some radiator upgrades. Heat pumps work best with larger emitters so they can run at lower flow temperatures. A proper survey should produce a room-by-room heat-loss calculation and a clear list of any radiator changes.
Will a heat pump work in an older or less insulated UK home?
Often yes, but it depends on heat loss and whether you can improve insulation and emitters. In higher-heat-loss homes, you may need more radiator capacity, careful design and realistic expectations about running patterns. A heat-loss survey is the deciding step, not the property’s age alone.
Will I need a smart meter or a different meter for heat pump tariffs?
Not necessarily, but some tariffs and time-of-use options may require a compatible meter (often a smart meter). If you have a legacy multi-rate meter or storage-heater setup, options can differ. When you compare deals, use your postcode and confirm your meter type to see what’s actually available.
How long does an air source heat pump installation take?
Many installations take a few days, but timelines vary with radiator changes, cylinder work, and any electrical upgrades. Access, pipe routes and making-good can extend the schedule. Ask for a written project plan including commissioning and handover time.
What should I check in an EDF heat pump quote before paying a deposit?
Check for a written heat-loss calculation, a room-by-room emitter plan, the make/model scope (or clearly described components), what’s included/excluded (cylinder, radiators, electrics, making good), warranty/aftercare terms, and how any grant is applied. If anything is vague, ask for clarification in writing.
Can I switch electricity supplier after getting a heat pump installed?
In most cases, yes — a heat pump doesn’t lock you into a supplier. However, your best option depends on your meter type, payment method, and whether you want a fixed or variable deal. If you’re on a fixed tariff, check for exit fees before switching. Compare whole-of-market options for your postcode for current deals.
How we assess this (transparent methodology)
This guide is designed to help you evaluate an EDF heat pump installation offer and sense-check typical UK pricing without relying on live supplier claims. We focus on the practical parts that drive outcomes: heat-loss design, emitter suitability, commissioning quality, grant eligibility steps, and the need to compare electricity tariffs once heating moves to electricity.
Our assumptions
- UK residential homes (owners and tenants), not business premises.
- Costs shown are editorial ranges for typical air source heat pump installations, recognising that surveys can add/remove scope.
- We do not assume any specific EDF tariff, unit rate or standing charge. Those depend on your postcode, meter type and payment method.
Limitations
- We can’t see your property’s heat loss, existing emitters or electrical condition — all of which change the price.
- Grant rules and funding windows can change. Always confirm current eligibility via official sources.
- EDF installations may involve different partner installers; service levels can vary by region and workload.
Trust signals
- Written by
- EnergyPlus Editorial Team
- Reviewed by
- Energy Specialist
- Last updated
- July 2026
Sources (UK)
- GOV.UK: Boiler Upgrade Scheme eligibility
- Citizens Advice: energy supply and switching help
- Ofgem: advice for households
If you’re unsure about contracts, deposits, cancellations or complaints, Citizens Advice and Ofgem explain your rights and the routes available.
Ready to compare energy deals for a heat-pump home?
See whole-of-market options for your postcode. It’s the simplest way to check what’s available for your meter type and payment method — and to avoid relying on outdated price examples.
Back to Energy Cost Saving Advice